How To Cut Tree Branches That Are Too High To Reach – 7 Effective Ways

How To Cut Tree Branches That Are Too High To Reach
How To Cut Tree Branches That Are Too High To Reach

Planting trees is very crucial for a pleasant environment and also for the protection of the ozone layer. Trees grow very fast, and a certain point we will need to prune them to have a beautiful environment and prevent obstruction.

Besides this, some of the trees need pruning for them to grow in good health. Some of the limbs or branches that need cutting are too high that we can’t reach when standing upright. This requires the use of the best high limb rope saw.

Therefore, there is a need for a better-enhanced mechanism for our environment to look better and avoid associated risks. This article will highlight the best way how to cut tree branches that are too high to reach and any other relevant details of cutting them.

Which Is The Right Time for cutting off limbs and branches?

It is a question that comes with a lot of ambiguity, but we got the correct answer for you. The best time to cut high branches and limbs is when the tree is dormant, especially winter.

Mainly because the tree has few chances of contracting diseases and pest infections due to the open woods. Pest and disease can destroy the whole tree and also transmit to other trees.

Moreover, if the tree limbs or branches are an obstruction or acting as a  danger to the members of the family or your house. It is safer you remove it regardless of the season.

Primarily because your safety comes first and you may incur extra unplanned expenses in case the branch or the limb falls accidentally.

What To Observe When Cutting Branches Off Trees That Are Too High

After deciding to cut a tree and you are pretty sure it is safe for you, there some critical issues that you should observe for a safe limbs and branch cutting process. Among the safety measures you should keep are;

  • Take the right element

Element implies the attire that you should wear to ensure that your health and body is not in stake during the process. When dealing with electrical equipment like an electric saw for cutting branches, wear close-fitting clothing whose material is a poor conductor of electricity.

Equip yourself with an eye protector to avoid the dust particles, insects, wood particles, or pine needles in your eyes. The shoes should have anti-slip soles. In case the equipment you will be using is noisy, also have ear protectors.

  • Inspect the trees for weakness or cracks before climbing

Cracks and lines of weakness is an indication that the tree is not capable of holding your weight. In such a situation, you can place your hands and feet on a different branch or limb or else work with a person who is on the ground to hold you if you fall.

Moreover, an aerial lift can remove all the trouble.

  • Avoid improper pruning cut

When pruning our trees at times signifies the awaited death of the tree out of an incorrect cut. Therefore, you need to prune tree branches the right way. A proper cut implies pruning the tree keenly with minimal damage for the quick healing process of the tree.

An example of an incorrect cut is cutting near the truck known as a flush cut or cutting too far away from the truck known as stub cut.

Cutting near the truck leaves a large wound that may take longer to heal and also removes the branch collar. Stub cut causes the tree to decay backwards through the centre of the root collar to the trunk of the tree, which is a slow death of the tree.

How Can You Cut or Trim Tree Limbs or Branches That Are Too High To Reach – Use These 7 Different Ways

1. How to cut tree branches using a pole pruner

A pole pruner is an equipment that will make your cutting very simple and quick. If you are planning to purchase a pole pruner, first access the height of the branch or the limb that needs cutting.

Keenness is essential when accessing the height because tree branches and limbs appear to be very close to the ground when in real sense there not.

To figure this out, you can compare the height of the branch or limbs with the nearby buildings or else use a tape measure to get the real height. Pole pruners came in different lengths where some can telescopic, fixed, or have a design that you can increase the sections to make it longer.

2. Pocket saw with a rope

A pocket saw is simply a chain saw whose chain has the rope on both ends. With this cutting tool, you will throw the line over the limb that you are cutting then pull the rope.

Keep the blade on the right position then get the cutting side on the branch and get on cutting. This tool is the most convenient tool that is simple to use and very affordable.

3. Using a pole saw

Pole saw it is a cutting tool that is preferable for diameters larger than 11/2 inches. The blade of a pole saw has a curved shape to make the cuts towards the top part of the branch or the limb.

The pole saw cuts by pulling it. This tool is free from pinching, which makes the cutting process hard. When you notice that the limb is moving downwards try to cut faster to avoid the limb from tearing much from the bark.

4. Ladder with a pruner

Let us focus cutting the limbs off the ground. In this case, you will need a sturdy ladder and a pruner. Place your ladder in a slightly slanting position. In case you are not sure of the stability of the ladder have someone to hold it for you.

Also, you can tie it on the tree to avoid the ladder from shifting its position. Make sure you do not place the ladder on the limb or branch that you will be pruning. With the pruner climb the tree to the specified limb and branch.

5. Rent a bucket lift

Furthermore, as a homeowner, you can rent a bucket lift available in your place. A bucket lift can be in a trailer type that you will have to pull with a truck or the ones that will need shipping to your doorstep. The bucket lifts have different capabilities and available in various sizes. The trailer type can lift to 40 feet.

After positioning it in the place that you want to use it, place the outriggers to keep it stable. You can use the pruner to reach the canopies that you want to bring down. The other type is the commercial self-propelling lifts that are more enhanced and can reach up to 125 feet.

Nevertheless, there some considerations that you should make before making bucket lift your choice. Make sure that you can drive the shipping vehicle to the spot without hindrances such as fence or plants. Ensure that the terrain of your location is not hilly.

6. Climb the tree using rope and harness

Climbing up the tree is the first idea that pops in your mind. Though its possibility depends on the type of the tree or the structure of the limb. Most of the evergreen trees are simple to climb and does not involve a lot of risks. The limbs that are too close to be together may pose some toughness while climbing and probably may need a professional climber.

You will need a rope system and help of a climbing harness to prune back the ends of a branch. After climbing the tree, you will require a cutting tool such as a pruner or saw to do the main exercise. If you will have to carry the cutting tool while you are climbing, place it in a position that it will not destruct your hands and legs, advisably tie it around your body.

7. Call a professional arborist

Some heights are too risk that they can pose a lot of risks if you are just a novice in this field. The tree can have complicated branch or limbs that have a complicated structure, and none of the above equipment’s can be kept in use.

In some terrains pose a lot of danger when using a ladder no matter how tight you tie it. Besides, some of the cutting tools might be too complex for you to use.

Nothing is worth your well-being, not even the tree in question. In such a situation, call a professional arborist to have them down without posing any danger.

Final Thoughts

Planting trees is crucial, and trimming the branches is also very vital. The best way to cut your branches and limbs is to ensure you have the best tool with you.

When choosing the cutting, observe the height of the tree and its diameter. Pick a well-performing tool and ensure that you keep the necessary safety measures.

Wear the right elements and take keen if you will be climbing the tree. In case the tree branches and limbs seem to be complicated, make a call to a professional.

As simple as the task appears to be, some techniques are vital in the process. It is better to incur the extra cost but keep you keep everyone else safe.

No Responses

Leave a Reply

Show Buttons
Hide Buttons